SEISAN is often used for volcanic monitoring. Many of the standard tools used in SEISAN can also be used for volcanic earthquakes, like epicenter location and magnitude. However, more special tool are also needed and below there is a description how this is done at the British Geological Survey (BGS).
Another description, made by Andrew Lockhart at the USGS, is given in a separate manual (seisan_volcano.pdf in INF or at http://seis.geus.net/software/seisan/seisan_volcano.pdf ). This manual is a mini SEISAN manual detailing the steps under Windows.
Volcano monitoring at BGS
By Brian Baptie
An important part of volcanic seismology and the seismic monitoring of active volcanoes is the correct recognition of the different types of seismic event generated by the volcanic activity. The principal event types include, volcano-tectonic events, caused by shear or tensile failure of rocks; long period events, generated by a volumetric source in a liquid; hybrid events; and volcanic tremor.
To be of value for volcanic monitoring, any database of seismic events should include the type or sub-class of individual events. This should allow users to then extract phase and location information over a selected time period for individual event types and calculate hourly and daily rates of event. Simple histogram plots showing the distribution of subclasses over time can be generated with the program VOLCSTAT. The progrm used GMT 6.1.1.
The user should create a text file in the DAT directory called VOLCANO.DEF (an example is already in the directory). The format of this file will be one line of text (80A) followed by successive lines with the format "i2,1x,6A,1X,40a" for number, sub-class code and description. An example of the file is shown below. Comments are preceded with '!'.
Current volcano sub-classes: ! Comment line 80 characters 1 vt volcano-tectonic ! Individual sub-class line 2 hybrid hybrid 3 lp long-period 4 tremor volcanic tremor 5 rf rockfall 6 un unknown 7 QUIT ! The last line should contain this entry
Registering volcanic sub-classes
Registration should be carried out as normal in MULPLT. From multi-trace mode enter 'p' to create a new s-file for the event in the database. Answering 'LV' to the prompt for event type marks the event as a local volcanic in the headers. If the VOLCANO.DEF file has been set up correctly in the DAT directory, the information on the different sub-classes will be printed to the terminal. Choosing an appropriate number selects the volcanic sub-class. The sub-class code is then entered in the s-file.
Modification of the s-file to incorporate volcanic sub-classes
The volcanic sub-class information is stored in a type 3 line within the s-file, e.g.
VOLC MAIN tremor 3 Columns 2:10 'VOLC MAIN' : Header identifier Columns 12:17 a6 : Sub-class flag Column 80 '3' : line type identifier
This allows the use of a maximum 6-character sub-class identifier, e.g. 'hybrid', which can then be searched for and selected.
VOLCSTAT: Creating histogram plots
The program reads S-files directly from the database, and creates input files as well as a GMT script to produce histogram plots of the distribution of subclasses over time. The user needs to enter database name, start and end time, and the subclasses that are to be plotted. An example of a plot is shown in Figure 39.1. The program supports 1-char subclass names only.
The following output files are created:
volcstat.batch - c-shell script to generate Postscript output using GMT
volcstat_counts.ps - Postscript output file
volcstat_counts_ type .out - for each event, the Julian date is written out, one file per subclass
volcstat_daily_ type .out - number of events per day, files written for each subclass
volcstat_counts_total.out - total event counts for each subclass
1-minute RSAM data can be created with WAVETOOL.
It is intended that additional parameters can be included in the above structure to included routine measurements of the volcanic earthquakes. For example, signal duration, peak amplitude and mean frequency can be calculated for individual stations and included on additional type 3 lines with a volcanic identifier. Parameters on each channel can then be averaged an inserted on the volcanic header line.
The proposed format for these lines is as follows
column format description 2:5 a4 'VOLC' Volcanic identifier 7:10 a4 station 12:15 a4 component 19:20 a2 'PA' field identifier 22:29 g8.3 peak amplitude 31:32 a2 'DU' field identifier 34:41 g8.3 signal duration 43:44 a2 'MF' field identifier 46:53 g8.3 mean frequency 55:56 a2 'SB' field identifier 58:65 g8.3 signal bandwidth 66:79 blank 80 a1 '3' line type identifier. For example VOLC MAIN tremor 3 VOLC KTK1 S Z PA .152E 06 DU 1.325 MF 2.472 3 VOLC KTK1 S N PA .167E 06 DU 1.997 MF 2.067 3 VOLC KTK1 S E PA .141E 06 DU 1.543 MF 1.998 3
This method of inclusion of volcanic parameters should allow for future flexibility such as incorporation of an additional parameter fields in columns 66 to 79. Also the use of type 3 lines means that existing software, such as the update program, are unaffected by these lines.
Peter Voss : Fri Nov 12 10:33:10 UTC 2021